INOFlex®
Now with
centrifugal force compensation.

HWR has responded to the development of modern machine tools and further developed the INOFlex® VL. As of now, our weight-reduced, centrically compensating INOFlex® VL chucks are available with centrifugal force compensation.

To the product

INOLine®
Quality Meets
Precision.

With the INO® clamping systems, both square and round components are clamped in an optimally concentric manner. As a result, you can manufacture your components at a lower cost, particularly when clamping deformation-susceptible components.

To INOLine

SOLIDLine
Developed further out of conviction.

With SOLIDLine we offer our customers the same superior service and high quality that we have provided for the past 16 years, while expanding our product range as a clamping technology manufacturer.

To SOLIDLine

INOFlex®
Endless Possibilities

INOFlex® is the flexible clamping system designed to solve practically every clamping task. Thanks to patented compensation, workpieces are reliably and concentrically clamped regardless of their geometry.

INOFlex

SOLIDGrip
& SOLIDPoint®
A strong team.

Thanks to the module set-up, our SOLIDPoint® and SOLIDBolt zero-point clamping systems and our SOLIDGrip clamps get you rigged out in seconds for any application.

SOLIDGrip
SOLIDGrip
INOTop®
SOLIDBolt
INOZet®
SOLIDPoint®
SOLIDStamp
UNIJaws®
INOFlex®

GRIPPING MOTION EXPERIENCED

Get an impression of our products in actual operation or have them explained in a short video.

All Videos

What’s new
with us?

15 Mar

NEW – Now with centrifugal force compensation

HWR has responded to the development of modern machine tools and further developed the INOFlex® VL. As of now, our weight-reduced, centrically compensating INOFlex® VL chucks are available with centrifugal force compensation. INOFlex® permits compensating centric clamping of round, rectangular…
04 Feb

The VT-S in a new size

Our INOFlex VT-S 4-jaw through-hole power chuck is now also available as standard in another small size with a chuck diameter of Ø 135mm. Thus, we now offer the INOFlex VT-S chucks in the range Ø 135 – 1200 mm.…
19 Jan

SOLIDGrip – The next level

Following our promise to further develop and optimize our products, our SOLIDGrip vices have been re-designed and at the same time offer greater customer benefits. [Click here for the product] After the optimization of the complete range, our SOLIDGrip centering…
09 Nov

SOLIDPoint® 4-fold plate

We have added a new product to the portfolio of our SOLIDPoint® family. With our SOLIDPoint® 4-fold plate you get a zero-point multi-plate with 96 grid, highest holding force by force amplification and identical pull-in forces as with the SOLIDPoint®…
17 Sep

SOLIDPoint® Twin Base

Also new in the SOLIDPoint® series is the the twin base with combined zero point system. This means that both the 52 and the 96 grid are combined in one plate. This is only available exclusively from HWR. The SOLIDPoint®…
10 Aug

SOLIDPoint® 2-fold plate

The SOLIDPoint® zero point technology is now also available in a double version. With the new 2-fold plate, you neither have a loss of clamping force nor do you have to do without the combined zero point system with 52…
02 Jun

Expansion to our SOLIDLine product line

With SOLIDLine we are able to offer our customers the service and quality they have been accustomed to. So we are pleased that we have expanded our product range to include several new products. SOLIDClick and SOLIDLock are new members…
28 May

Our growth requires more space

In order to be able to put our new machine DMU mono Block FDS 125 into operation, we have built up our production area to 3500 sqm. On this ultra-modern milling, turning and grinding machine we will produce INOFlex® chucks…
06 Sep

INOFlex® VT-S

The new INOFlex® VT-S will be presented for the first time to the general public at the EMO in Hannover. Aside from the revised design, application parameters such as centering  precision have been enhanced. After the presentation of the INOFlex®…
01 Sep

Our new SOLIDLine product

HWR starts with an additional product range for SOLIDLine milling. With more than 16 years of experience, we have the necessary know-ho to solve practical problems in the machining process. Our guiding principle is a healthy mistrust, to question existing…
04 Aug

New design for HWR as of today

HWR  appears in a new design as from today. Apart from the new Website, the entire presentation including catalogues has been revised from the optical and content angle. In addition to the new design, we have also added a complete…
01 Aug

We become official partner in DMQP

Since 01.08.19 HWR is official partner in the DMQP of DMG Mori Seiki. The INOFlex® chucks from HWR are now available as standard on all DMG Mori Seiki turning machines worldwide. Patent pending in 2013, the centric and compensating 4-jaw…
WITH MANY MANY YEARS OF MARKET EXPERIENCE, WE KNOW WHAT FUNCTIONS IN CLAMPING TECHNOLOGY

30 years of experience
and innovation

Three decades of market experience have shown us what functions in clamping technology. The INOLine® and SOLIDLine products have arisen from this.

Worldwide marketing
and support

We cooperate with over 25 trade partners across the globe in a fine-meshed network to market our products internationally.

Save valuable time with HWR products

HWR products represent practical solutions for practical applications. Our clamping technology saves you time and money.

Customer success stories

Präzitech

“Almost continuously in operation”

Flexible regarding possibilities, precise under tension. This is the philosophy of PräziTec Haustein GmbH to a tee. The metal working company from Tettnang on Lake Constance manufactures a multitude of turning, milling, grinding and multi-task machining parts for customers from a wide range of industries. In the past few years the company – employing 40 staff at the moment –…
EMB

Always correctly centered and compensated

Thanks to the and clamping solutions of HWR Spanntechnik, EMB Zerspanungstechnik can even better fulfil customer quality requirements in production work. The mid-Hesse Lahn valley near Biedenkopf was the home of many small and larger foundries up to the 1960s and 1970s. But in the long term only the large ones were in a position to compete. This is reflected…
INOFlex Kersten Maschinenbau

INOFlex® – powerful clamp

What do a cocoa press, a printing machine and a wind power plant have in common? Highly different parts can be fitted in them which at Kersten Maschinenbau are all machined with clamps from HWR Spanntechnik. The diversity of parts manufactured at Kersten Maschinenbau GmbH in Niederau near Meißen is enormous – and also one of the strong points of…
FENDT

Courage sown, success harvested

HWR Spanntechnik delivers chuck 1000 to tractor manufacturer. “A fantastic success story which shows us that dedication, courage and belief in one’s own innovative power is still worthwhile today”, says Volker Henke, Managing Director of HWR Spanntechnik from Oyten. The background to this is the delivery of clamp 1000 within just three years after being launched on the market. Number…

SOLIDLine
Developed further out of conviction.

The SOLIDLine provides our customers with the usual service and quality they have become used to from us for 16 years and extends our product range as a clamping technology manufacturer.

To SOLIDLine

INOLine®
Quality meets
precision.

The INO® clamping system clamps both cubic and round components in an optimally concentric manner. As a result, you manufacture your components at low-cost. Particularly when clamping deformation-susceptible components …

TO INOLine

Do you want to
get to know our products?

There are no upcoming exhibitions.

Clamping Jaws Finder
Company
Choose company
Product
Choose product
Diameter
Choose diameter
Download datasheet